Ball Roadmaster Pilot GMT (40mm) DG3038A Supply
Description
A TRUE GMT WITH TWO TECHNICAL ACHIEVEMENTS AND NEXT-LEVEL CONVENIENCE.
As a testimonial to our commitment to excellence, the Roadmaster Pilot GMT series is equipped with two remarkable timekeeping functions that soar to new levels of convenience. When traveling, simply push the quick-set buttons to jump the local 12-hour hand to its desired position without stopping the seconds hand. Then easily turn the crown to jump the date correctly into position, eliminating the need to circle the dial with the hour hand. Complete with a virtually-scratchproof ceramic bezel, amazingly bright micro gas lights and chronometer-grade precision, the Pilot GMT is an ingenious traveler s watch for the modern explorer.
A TRUE GMT WITH TWO TECHNICAL ACHIEVEMENTS AND NEXT-LEVEL CONVENIENCE.
LIMITED EDITION
- 1000
-
WEIGHT
- Approx. 160g
-
MOVEMENT
- Automatic caliber BALL RR1204-C
-
- Chronometer certified COSC
-
SIZE (CASE)
- Ø 40mm, height 14mm
-
WATER RESISTANCE
- 300m 1000ft
-
ANTI-MAGNETISM
- 4,800A m
-
MICRO GAS TUBES
- 27 micro gas tubes on hour, minute and GMT hands and dial for night reading capability
-
FUNCTIONS
- Patented quick set mechanism for local 12-hour hand
-
- Three time zone indication
-
- Hours, minutes, sweep seconds and magnified date
-
- 5,000Gs shock resistance
-
CASE MATERIAL
- Titanium
-
- Bi-directional rotating ceramic bezel, illuminated with Super LumiNova
-
- Sapphire crystal transparent case back
-
CROWN
- Screwed-in crown
-
CRYSTAL
- Anti-reflective sapphire crystal
-
DIAL COLOR
- Black
-
BRACELET
- Tapered titanium and stainless steel bracelet
-
LUG WIDTH
- 20mm
-
LUG TO LUG
- Approx. 47.8mm
-
BALL INTERNATIONAL WARRANTY
Built to exceed traditional Swiss watchmaking standards, your BALL watch is warranted by BALL Watch Company SA for a period of twenty-four months or forty-eight months if you benefit from a Premium warranty card from the date of purchase under the terms and conditions of this warranty. You are cordially invited to register your timepiece on our web site www.ballwatch.com within 90 days of purchase for a free extended twelve months warranty. This will effectively cover your BALL watch for a total of thirty-six or sixty months warranty period. The international warranty covers material and manufacturing defects existing at the time of delivery of the purchased watch. The warranty will only be valid when the warranty card is dated, fully and correctly completed and stamped by a BALL Authorized Dealer.
During the warranty period and by presenting the valid warranty card, you will be entitled to free of charge servicing of any repair carried out for the above manufacturing defects. In the event that repairs are unable to restore the normal conditions, BALL Watch Company SA guarantees its replacement by a BALL watch of identical or similar characteristics. The warranty for the replacement watch ends twenty-four months after the date of replacement of the replaced watch.
The international warranty does not extend to the bracelet, strap, buckle or crystal, normal wear, tear and ageing, nor does it cover any damage on any part of the watch resulting from abnormal abusive use, lack of care, negligence, incorrect use of the watch and non-observance of the operating instructions provided by BALL Watch Company SA.
We reserve the right to relinquish all responsibilities under this guarantee for repair if the watch has been handled by unauthorized persons or if it has been altered in its original condition beyond BALL Watch Company SA’s control. Shipping the watch to one of our authorized service centers will be at the expense of the customer.
International Service Centers
Ball Watch Service Centers are authorized to perform maintenance and repairs on Ball watches. To find the nearest Service Center, kindly visit https: shop.ballwatch.ch en store .
Additional Information
Dial Color
Black, Blue, Green
Bezel
Blue/Red, Black/Green, Black/Red
Related products
Ball Engineer II Endurance 1917 (40mm) NM3000C on Sale
Original price was: $2,049.00.$614.70Current price is: $614.70.
Benchmark Black Titanium 9mm Band CF69491BKT10 Fashion
Original price was: $495.00.$247.50Current price is: $247.50.
Ball Engineer II Endurance 1917 (45mm) NM3500C Supply
Original price was: $2,649.00.$794.70Current price is: $794.70.
FREDERIQUE CONSTANT SLIMELINE MOONPHASE FC-705V4S4 Hot on Sale
Original price was: $2,699.00.$809.70Current price is: $809.70.
Benchmark Black Titanium and Carbon Fiber 9mm Band CF69488CFBKT10 Discount
Original price was: $295.00.$147.50Current price is: $147.50.
* By Signing up here i agree to receive Minigear’s email newsletter.
© 2023 Dexons Theme. All rights reserved.
We using safe payment for
innercityus.shop © 2025 All Rights Reserved
-
-
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
- Image
- SKU
- Rating
- Price
- Stock
- Description
- Weight
- Dimensions
- Additional information
- Add to cart
A TRUE GMT WITH TWO TECHNICAL ACHIEVEMENTS AND NEXT-LEVEL CONVENIENCE.
As a testimonial to our commitment to excellence, the Roadmaster Pilot GMT series is equipped with two remarkable timekeeping functions that soar to new levels of convenience. When traveling, simply push the quick-set buttons to jump the local 12-hour hand to its desired position without stopping the seconds hand. Then easily turn the crown to jump the date correctly into position, eliminating the need to circle the dial with the hour hand. Complete with a virtually-scratchproof ceramic bezel, amazingly bright micro gas lights and chronometer-grade precision, the Pilot GMT is an ingenious traveler s watch for the modern explorer.
A TRUE GMT WITH TWO TECHNICAL ACHIEVEMENTS AND NEXT-LEVEL CONVENIENCE.
LIMITED EDITION
- 1000
-
WEIGHT
- Approx. 160g
-
MOVEMENT
- Automatic caliber BALL RR1204-C
-
- Chronometer certified COSC
-
SIZE (CASE)
- Ø 40mm, height 14mm
-
WATER RESISTANCE
- 300m 1000ft
-
ANTI-MAGNETISM
- 4,800A m
-
MICRO GAS TUBES
- 27 micro gas tubes on hour, minute and GMT hands and dial for night reading capability
-
FUNCTIONS
- Patented quick set mechanism for local 12-hour hand
-
- Three time zone indication
-
- Hours, minutes, sweep seconds and magnified date
-
- 5,000Gs shock resistance
-
CASE MATERIAL
- Titanium
-
- Bi-directional rotating ceramic bezel, illuminated with Super LumiNova
-
- Sapphire crystal transparent case back
-
CROWN
- Screwed-in crown
-
CRYSTAL
- Anti-reflective sapphire crystal
-
DIAL COLOR
- Black
-
BRACELET
- Tapered titanium and stainless steel bracelet
-
LUG WIDTH
- 20mm
-
LUG TO LUG
- Approx. 47.8mm
-
BALL INTERNATIONAL WARRANTY
Built to exceed traditional Swiss watchmaking standards, your BALL watch is warranted by BALL Watch Company SA for a period of twenty-four months or forty-eight months if you benefit from a Premium warranty card from the date of purchase under the terms and conditions of this warranty. You are cordially invited to register your timepiece on our web site www.ballwatch.com within 90 days of purchase for a free extended twelve months warranty. This will effectively cover your BALL watch for a total of thirty-six or sixty months warranty period. The international warranty covers material and manufacturing defects existing at the time of delivery of the purchased watch. The warranty will only be valid when the warranty card is dated, fully and correctly completed and stamped by a BALL Authorized Dealer.
During the warranty period and by presenting the valid warranty card, you will be entitled to free of charge servicing of any repair carried out for the above manufacturing defects. In the event that repairs are unable to restore the normal conditions, BALL Watch Company SA guarantees its replacement by a BALL watch of identical or similar characteristics. The warranty for the replacement watch ends twenty-four months after the date of replacement of the replaced watch.
The international warranty does not extend to the bracelet, strap, buckle or crystal, normal wear, tear and ageing, nor does it cover any damage on any part of the watch resulting from abnormal abusive use, lack of care, negligence, incorrect use of the watch and non-observance of the operating instructions provided by BALL Watch Company SA.
We reserve the right to relinquish all responsibilities under this guarantee for repair if the watch has been handled by unauthorized persons or if it has been altered in its original condition beyond BALL Watch Company SA’s control. Shipping the watch to one of our authorized service centers will be at the expense of the customer.
International Service Centers
Ball Watch Service Centers are authorized to perform maintenance and repairs on Ball watches. To find the nearest Service Center, kindly visit https: shop.ballwatch.ch en store .
Additional Information
Dial Color
Black, Blue, Green
Bezel
Blue/Red, Black/Green, Black/Red
Related products
Ball Engineer II Endurance 1917 (40mm) NM3000C on Sale
Original price was: $2,049.00.$614.70Current price is: $614.70.
Benchmark Black Titanium 9mm Band CF69491BKT10 Fashion
Original price was: $495.00.$247.50Current price is: $247.50.
Ball Engineer II Endurance 1917 (45mm) NM3500C Supply
Original price was: $2,649.00.$794.70Current price is: $794.70.
FREDERIQUE CONSTANT SLIMELINE MOONPHASE FC-705V4S4 Hot on Sale
Original price was: $2,699.00.$809.70Current price is: $809.70.
Benchmark Black Titanium and Carbon Fiber 9mm Band CF69488CFBKT10 Discount
Original price was: $295.00.$147.50Current price is: $147.50.
* By Signing up here i agree to receive Minigear’s email newsletter.
© 2023 Dexons Theme. All rights reserved.
We using safe payment for
innercityus.shop © 2025 All Rights Reserved
-
-
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
- Image
- SKU
- Rating
- Price
- Stock
- Description
- Weight
- Dimensions
- Additional information
- Add to cart
A TRUE GMT WITH TWO TECHNICAL ACHIEVEMENTS AND NEXT-LEVEL CONVENIENCE.
LIMITED EDITION
- 1000
-
WEIGHT
- Approx. 160g
-
MOVEMENT
- Automatic caliber BALL RR1204-C
-
- Chronometer certified COSC
-
SIZE (CASE)
- Ø 40mm, height 14mm
-
WATER RESISTANCE
- 300m 1000ft
-
ANTI-MAGNETISM
- 4,800A m
-
MICRO GAS TUBES
- 27 micro gas tubes on hour, minute and GMT hands and dial for night reading capability
-
FUNCTIONS
- Patented quick set mechanism for local 12-hour hand
-
- Three time zone indication
-
- Hours, minutes, sweep seconds and magnified date
-
- 5,000Gs shock resistance
-
CASE MATERIAL
- Titanium
-
- Bi-directional rotating ceramic bezel, illuminated with Super LumiNova
-
- Sapphire crystal transparent case back
-
CROWN
- Screwed-in crown
-
CRYSTAL
- Anti-reflective sapphire crystal
-
DIAL COLOR
- Black
-
BRACELET
- Tapered titanium and stainless steel bracelet
-
LUG WIDTH
- 20mm
-
LUG TO LUG
- Approx. 47.8mm
-
BALL INTERNATIONAL WARRANTY
Built to exceed traditional Swiss watchmaking standards, your BALL watch is warranted by BALL Watch Company SA for a period of twenty-four months or forty-eight months if you benefit from a Premium warranty card from the date of purchase under the terms and conditions of this warranty. You are cordially invited to register your timepiece on our web site www.ballwatch.com within 90 days of purchase for a free extended twelve months warranty. This will effectively cover your BALL watch for a total of thirty-six or sixty months warranty period. The international warranty covers material and manufacturing defects existing at the time of delivery of the purchased watch. The warranty will only be valid when the warranty card is dated, fully and correctly completed and stamped by a BALL Authorized Dealer.
During the warranty period and by presenting the valid warranty card, you will be entitled to free of charge servicing of any repair carried out for the above manufacturing defects. In the event that repairs are unable to restore the normal conditions, BALL Watch Company SA guarantees its replacement by a BALL watch of identical or similar characteristics. The warranty for the replacement watch ends twenty-four months after the date of replacement of the replaced watch.
The international warranty does not extend to the bracelet, strap, buckle or crystal, normal wear, tear and ageing, nor does it cover any damage on any part of the watch resulting from abnormal abusive use, lack of care, negligence, incorrect use of the watch and non-observance of the operating instructions provided by BALL Watch Company SA.
We reserve the right to relinquish all responsibilities under this guarantee for repair if the watch has been handled by unauthorized persons or if it has been altered in its original condition beyond BALL Watch Company SA’s control. Shipping the watch to one of our authorized service centers will be at the expense of the customer.
International Service Centers
Ball Watch Service Centers are authorized to perform maintenance and repairs on Ball watches. To find the nearest Service Center, kindly visit https: shop.ballwatch.ch en store .
Additional Information
Dial Color
Black, Blue, Green
Bezel
Blue/Red, Black/Green, Black/Red
Related products
Ball Engineer II Endurance 1917 (40mm) NM3000C on Sale
Original price was: $2,049.00.$614.70Current price is: $614.70.
Benchmark Black Titanium 9mm Band CF69491BKT10 Fashion
Original price was: $495.00.$247.50Current price is: $247.50.
Ball Engineer II Endurance 1917 (45mm) NM3500C Supply
Original price was: $2,649.00.$794.70Current price is: $794.70.
FREDERIQUE CONSTANT SLIMELINE MOONPHASE FC-705V4S4 Hot on Sale
Original price was: $2,699.00.$809.70Current price is: $809.70.
Benchmark Black Titanium and Carbon Fiber 9mm Band CF69488CFBKT10 Discount
Original price was: $295.00.$147.50Current price is: $147.50.
* By Signing up here i agree to receive Minigear’s email newsletter.
© 2023 Dexons Theme. All rights reserved.
We using safe payment for
innercityus.shop © 2025 All Rights Reserved
-
-
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
- Image
- SKU
- Rating
- Price
- Stock
- Description
- Weight
- Dimensions
- Additional information
- Add to cart
LIMITED EDITION
- 1000
-
WEIGHT
- Approx. 160g
-
MOVEMENT
- Automatic caliber BALL RR1204-C
-
- Chronometer certified COSC
-
SIZE (CASE)
- Ø 40mm, height 14mm
-
WATER RESISTANCE
- 300m 1000ft
-
ANTI-MAGNETISM
- 4,800A m
-
MICRO GAS TUBES
- 27 micro gas tubes on hour, minute and GMT hands and dial for night reading capability
-
FUNCTIONS
- Patented quick set mechanism for local 12-hour hand
-
- Three time zone indication
-
- Hours, minutes, sweep seconds and magnified date
-
- 5,000Gs shock resistance
-
CASE MATERIAL
- Titanium
-
- Bi-directional rotating ceramic bezel, illuminated with Super LumiNova
-
- Sapphire crystal transparent case back
-
CROWN
- Screwed-in crown
-
CRYSTAL
- Anti-reflective sapphire crystal
-
DIAL COLOR
- Black
-
BRACELET
- Tapered titanium and stainless steel bracelet
-
LUG WIDTH
- 20mm
-
LUG TO LUG
- Approx. 47.8mm
-
BALL INTERNATIONAL WARRANTY
Built to exceed traditional Swiss watchmaking standards, your BALL watch is warranted by BALL Watch Company SA for a period of twenty-four months or forty-eight months if you benefit from a Premium warranty card from the date of purchase under the terms and conditions of this warranty. You are cordially invited to register your timepiece on our web site www.ballwatch.com within 90 days of purchase for a free extended twelve months warranty. This will effectively cover your BALL watch for a total of thirty-six or sixty months warranty period. The international warranty covers material and manufacturing defects existing at the time of delivery of the purchased watch. The warranty will only be valid when the warranty card is dated, fully and correctly completed and stamped by a BALL Authorized Dealer.
During the warranty period and by presenting the valid warranty card, you will be entitled to free of charge servicing of any repair carried out for the above manufacturing defects. In the event that repairs are unable to restore the normal conditions, BALL Watch Company SA guarantees its replacement by a BALL watch of identical or similar characteristics. The warranty for the replacement watch ends twenty-four months after the date of replacement of the replaced watch.
The international warranty does not extend to the bracelet, strap, buckle or crystal, normal wear, tear and ageing, nor does it cover any damage on any part of the watch resulting from abnormal abusive use, lack of care, negligence, incorrect use of the watch and non-observance of the operating instructions provided by BALL Watch Company SA.
We reserve the right to relinquish all responsibilities under this guarantee for repair if the watch has been handled by unauthorized persons or if it has been altered in its original condition beyond BALL Watch Company SA’s control. Shipping the watch to one of our authorized service centers will be at the expense of the customer.
International Service Centers
Ball Watch Service Centers are authorized to perform maintenance and repairs on Ball watches. To find the nearest Service Center, kindly visit https: shop.ballwatch.ch en store .
Additional Information
Dial Color
Black, Blue, Green
Bezel
Blue/Red, Black/Green, Black/Red
Related products
Ball Engineer II Endurance 1917 (40mm) NM3000C on Sale
Original price was: $2,049.00.$614.70Current price is: $614.70.
Benchmark Black Titanium 9mm Band CF69491BKT10 Fashion
Original price was: $495.00.$247.50Current price is: $247.50.
Ball Engineer II Endurance 1917 (45mm) NM3500C Supply
Original price was: $2,649.00.$794.70Current price is: $794.70.
FREDERIQUE CONSTANT SLIMELINE MOONPHASE FC-705V4S4 Hot on Sale
Original price was: $2,699.00.$809.70Current price is: $809.70.
Benchmark Black Titanium and Carbon Fiber 9mm Band CF69488CFBKT10 Discount
Original price was: $295.00.$147.50Current price is: $147.50.
* By Signing up here i agree to receive Minigear’s email newsletter.
© 2023 Dexons Theme. All rights reserved.
We using safe payment for
innercityus.shop © 2025 All Rights Reserved
-
-
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
- Image
- SKU
- Rating
- Price
- Stock
- Description
- Weight
- Dimensions
- Additional information
- Add to cart
- 1000
-
- Approx. 160g
-
- Automatic caliber BALL RR1204-C
- Chronometer certified COSC
-
- Ø 40mm, height 14mm
-
- 300m 1000ft
-
- 4,800A m
-
- 27 micro gas tubes on hour, minute and GMT hands and dial for night reading capability
-
- Patented quick set mechanism for local 12-hour hand
- Three time zone indication
- Hours, minutes, sweep seconds and magnified date
- 5,000Gs shock resistance
-
- Titanium
- Bi-directional rotating ceramic bezel, illuminated with Super LumiNova
- Sapphire crystal transparent case back
-
- Screwed-in crown
-
- Anti-reflective sapphire crystal
-
- Black
-
- Tapered titanium and stainless steel bracelet
-
- 20mm
-
- Approx. 47.8mm
-
- Image
- SKU
- Rating
- Price
- Stock
- Description
- Weight
- Dimensions
- Additional information
- Add to cart
BALL INTERNATIONAL WARRANTY
Built to exceed traditional Swiss watchmaking standards, your BALL watch is warranted by BALL Watch Company SA for a period of twenty-four months or forty-eight months if you benefit from a Premium warranty card from the date of purchase under the terms and conditions of this warranty. You are cordially invited to register your timepiece on our web site www.ballwatch.com within 90 days of purchase for a free extended twelve months warranty. This will effectively cover your BALL watch for a total of thirty-six or sixty months warranty period. The international warranty covers material and manufacturing defects existing at the time of delivery of the purchased watch. The warranty will only be valid when the warranty card is dated, fully and correctly completed and stamped by a BALL Authorized Dealer.
During the warranty period and by presenting the valid warranty card, you will be entitled to free of charge servicing of any repair carried out for the above manufacturing defects. In the event that repairs are unable to restore the normal conditions, BALL Watch Company SA guarantees its replacement by a BALL watch of identical or similar characteristics. The warranty for the replacement watch ends twenty-four months after the date of replacement of the replaced watch.
The international warranty does not extend to the bracelet, strap, buckle or crystal, normal wear, tear and ageing, nor does it cover any damage on any part of the watch resulting from abnormal abusive use, lack of care, negligence, incorrect use of the watch and non-observance of the operating instructions provided by BALL Watch Company SA.
We reserve the right to relinquish all responsibilities under this guarantee for repair if the watch has been handled by unauthorized persons or if it has been altered in its original condition beyond BALL Watch Company SA’s control. Shipping the watch to one of our authorized service centers will be at the expense of the customer.
International Service Centers
Ball Watch Service Centers are authorized to perform maintenance and repairs on Ball watches. To find the nearest Service Center, kindly visit https: shop.ballwatch.ch en store .
Additional Information
Dial Color Black, Blue, Green
Bezel Blue/Red, Black/Green, Black/Red
Related products
Ball Engineer II Endurance 1917 (40mm) NM3000C on Sale
Original price was: $2,049.00.$614.70Current price is: $614.70.Benchmark Black Titanium 9mm Band CF69491BKT10 Fashion
Original price was: $495.00.$247.50Current price is: $247.50.Ball Engineer II Endurance 1917 (45mm) NM3500C Supply
Original price was: $2,649.00.$794.70Current price is: $794.70.FREDERIQUE CONSTANT SLIMELINE MOONPHASE FC-705V4S4 Hot on Sale
Original price was: $2,699.00.$809.70Current price is: $809.70.Benchmark Black Titanium and Carbon Fiber 9mm Band CF69488CFBKT10 Discount
Original price was: $295.00.$147.50Current price is: $147.50.* By Signing up here i agree to receive Minigear’s email newsletter.© 2023 Dexons Theme. All rights reserved.
We using safe payment for innercityus.shop © 2025 All Rights Reserved
LUG TO LUG
LUG WIDTH
BRACELET
DIAL COLOR
CRYSTAL
CROWN
CASE MATERIAL
FUNCTIONS
MICRO GAS TUBES
ANTI-MAGNETISM
WATER RESISTANCE
SIZE (CASE)
MOVEMENT
WEIGHT
